ST Models Fox Glider Nose-cone Tow Release
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a nose cone with built in tow release mechanism for the ST Models 1.8m Fox glider.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 41
- Makes
- 0
- Views
- 446
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a nose cone with built in tow release mechanism for the ST Models 1.8m Fox glider. It is designed to replace the motor and folding prop that comes with the plane, to allow it to be converted to an aero-tow glider.
The tow release mechanism is a "pin in tube" style release, so you will need a length of music wire to act as the pin and run back to your release servo. The mechanisim is designed for 1mm wire, but anything from about 0.8-1.5mm should work fine.
I use these in my planes
https://hobbyking.com/en\_us/push-rod-and-sleeve-set-5pcs-bag.html
This model should only require supports under the lip at the base of the cone. I printed mine with 10% infill and it is still very strong.
Print instructions
Category: R/C Vehicles