1 / 1
Condom dispenser, wall mount (PROTOTYPE)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€14.22 – €17.38 net (excluding VAT)
For file: condom dispenser v6_0.4n_0.25mm_PETG_MK4S_6h15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €15.80 excluding VAT (range midpoint).
- Weight reported by the author
- 425 g
- Print time reported by the author
- 6.26 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple condom dispenser, wall mount
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 343
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This device is a prototype only. Use at your own risk.
Manufacturing instructions:
- Material: PETG
- 3D Printer: FDM 3D printer, average print time 6-7 hours
- Slicer settings: 0.25mm layer height, 3 perimeters, no supports needed
- Post processing instructions: check the fit of the cover before installing.