Magnet für Schlammabscheider / Magnet for sludge separator
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.38 – €4.13 net (excluding VAT)
For file: Magnethalter_Schlammabscheider, mit Schnitt_0.4n_0.2mm_PLA_MINI_4h11m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.76 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 4.19 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Eine Halterung für Magnete welche an einen Caleffi Schlammabscheider angebracht werden kann.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Eine Halterung welche Magnete um den Schlammabscheider gleichmäßig verteilt und in Position hält. Geeignet für Schlammabscheider welche nicht mit dieser Option bestellt wurden.
Die Magnete werden einfach in die Öffnung geschoben, der Deckel aufgelegt und verschraubt (vorbohren sinnvoll). Anschließend kann der Magnetfilter auf den Schlammabscheider geschoben werden und die M4 Schraube wird angezogen.
Verwendete Magnete
14 Stück N42 Quadermagnet 20 x 10 x 5 mm (hält 3,8 kg) (1,85€/Stk.)
Verwendete Schrauben
1 Stück M4x20mm, M4 Unterlegscheibe, M4 Mutter;
3 Stück Elektronikschrauben
+++++++
A bracket which evenly distributes magnets around the sludge separator and holds them in position. Suitable for sludge separators that were not ordered with this option.
The magnets are simply pushed into the opening, the cover is placed on top and screwed into position (pre-drilling is recommended). The magnetic filter can then be pushed onto the sludge separator and the M4 screw tightened.
Magnets used
14 pieces N42 block magnet 20 x 10 x 5 mm (holds 3.8 kg) (1.85€/pc.)
Screws used
1 piece M4x20mm, M4 washer, M4 nut;
3 electronic screws