1 / 3
Squid Game - Front Man mask - Simplified for Prusa MINI
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The mask of the Front Man from Squid Game, simplified to print on the Prusa MINI with as few supports as possible.
- Rating
- 4.75 / 5
- Likes
- 218
- Downloads
- 1,440
- Makes
- 8
- Views
- 6,249
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution
Based on the extraordinarily accurate model created by Thingiverse user kimgooni.
I did some small invisible simplifications on the model to save a couple of hours of printing support structures. It results in 16 hours of printing with most of the default settings. I made
- the chin flat on the print bed;
- the inside of the mask as 2 simple polygones that print as overhang; and
- the top eyelids horizontal so they print as bridges.
For the eye grilles, I used a simple Box with a Grid fill pattern and 1 mm extrusion width. It takes 4 minutes to print the two. I welded them to the mask with a solder iron and cut the extra.