Proxmark3 X Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- GNU General Public License v3.0
The cutouts for buttons and switches may look oversized, but making them any smaller makes them very difficult to operate.
Print with a 0.4mm nozzle. For the main body, print standing on its open end. For the lid, print on its face.
The lid can be affixed with 2xM3x8 bolts
It's quite a tight fit, but the Proxmark3 X is removable if you pull on one of the posts with some pliers.
Be careful upon insertion - the buttons protude slightly beyond the circuit board. A channel has been made to help with this, but printer tolerances could still cause the buttons to catch on the case during insertion, leading to a risk of them snapping or being ripped off.