1 / 4
bague à copier parametrique pour festool QF1010 - Parametric copy ring for festool QF1010 — image 1
1 / 4

bague à copier parametrique pour festool QF1010 - Parametric copy ring for festool QF1010

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.66 – €0.80 net (excluding VAT)

For file: bague de copiage parametrique-fraise de 20_0.2mm_ABS_MK3S_46m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.73 excluding VAT (range midpoint).

Weight reported by the author
6 g
Print time reported by the author
46.2 min
Source material
ABS
Estimate material
ABS
Estimate printer
Bambu Lab X1 Carbon - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Amelioration du précédent modèle rendu paramètrique - Improved the previous parametric rendered model

Rating
0 / 5
Likes
7
Downloads
67
Makes
0
Views
314
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Amélioration du modèle précédent (https://www.printables.com/model/465020-bague-a-copier-pour-defonceuse-festool-qf1010) par ajout d'une feuille de tableur dans le fichier Freecad.Le modèle a été complétement redessiné. pour permettre de modifier facilement plusieurs paramètres : 

Aucune connaissance de Freecad nécessaire.

C4 : Diamètre de la fraise

C5 : Distance entre la fraise et le diametre intérieur 

C6 : Epaisseur de la paroi du guide (ces deux paramètres vous permettent d'ajuster l'écart entre le gabarit et la coupe)

C7 : hauteur du guide.

Dans le tableur, éditer les cellules en bleu sous la forme “= xx mm”. 

Ne pas toucher aux autres cellules.

-----------------------------------------------------------------------------------------------------------

Improved the previous model (https://www.printables.com/model/465020-bague-a-copier-pour-defonceuse-festool-qf1010) by adding a spreadsheet sheet in the Freecad file.The model has been completely redesigned to allow you to easily modify several parameters :

No knowledge of Freecad necessary.

C4 : Cutter diameter 

C5 : Distance between the cutter and the inside diameter

C6 : Thickness of the fence wall (these two parameters allow you to adjust the gap between the jig and the cut)

C7 : Height of the guide. 

In the spreadsheet, edit the cells in blue as "= xx mm". 

Do not touch other cells.

Tags