PonyLumen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was the first ever pony my kid and I created using ponylumen. As you can see this was done almost a decade ago
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Public Domain
This was from Ponylumen. My kid created it and wants it printed. Have spent a lot of time repairing surface and smoothing. Will print in white PLA first. Needs a wee bit more work.
Added a new version with fixed right foot (base had 2 valleys). Used mesh lab filter "quadratic edge collapse decimation 0.5). Fixed around unicorn horn base and under ears).
Printed one out with light supports with a raft (I will try a brim next time).
Pony Thickened - Meshmixer Print Repair min 0.1 thickness
# Print Settings
Printer: XYZ Pro
Rafts: Yes
Supports: Yes
Resolution: 0.3
Infill: 20%
Notes:
Yellow ABS
Again, this was one of the first difficult prints I tried on my XYZ printer (I no longer use this printer). These were made for resin not FDM, hence the poor print. However considering how long ago I did this, it was a cool print for its day.