Prusa XL Enclosure Adjustable Lower Air Vent Covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sometimes you need to keep that heat in.
- Rating
- 4.75 / 5
- Likes
- 47
- Downloads
- 146
- Makes
- 4
- Views
- 968
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
These are adjustable air vent covers for the official Prusa XL enclosure. Previously I had made something similar although just for the front vents, this updated model also covers the side vents.
Generally you want to have these open all the time unless you have a specific reason to have them closed. Typically with PETG, PLA and TPU you should keep these open unless your environment is unusually cold.
You will require the following hardware to complete this. Note you can easily live with less of the listed hardware and just use the two screw holes at each end, although you can use the others also if you wish:
20 M3 inserts, Ruthex or CNC Kitchen (12 if just using screws at ends)
20 M3 screws (12 if just using screws at ends)
16 M3 washers (8 if just using screws at ends)
The print is configured to use PLA supports for PETG, this works really well and ensures the sliding surfaces are smooth enough to function. The adjustable vents may feel a little stiff initially but they loosen up and feel fine when fitted to the enclosure.
![]() | Install inserts into the shorter side. Note this is on the inside of the cover. If you plan to use less screws and washers, only install these on the right side as pictured. Do this for both parts. |
![]() | Do the same for the longer side, only installing the ones to the left as pictured if you plan to use less screws and inserts. |
![]() | Install an insert in each of the four knobs. |
![]() | Slide the covers into the main body. Note the orientation of the holes. |
![]() | Now attach the knobs from behind using an M3x8 screw. Do not use a washer, as it will bind with the plastic in the main body. |
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨




