Hueforge - Ansel Adams Moon and Half Dome
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A recreation of Ansel Adam's famous Moon and Half Dome picture using Hueforge
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used (try as close as possible to get the same outcome as I did):
PLA Overture White Transmission Distance: 4.4
PLA Overture Space Gray Transmission Distance: 2.1
PLA Overture Light Gray Transmission Distance: 0.7
PLA Overture Black Transmission Distance: 0.7
This print uses 4 unique filaments
Swap Instructions:
Start with White
At layer #8 (0.72mm) swap to Space Gray
At layer #13 (1.12mm) swap to Light Gray
At layer #14 (1.2mm) swap to Black for the rest.
If resizing, leave z heights the same and only change x and y axes.