BTT eddy adjustable probe mount for Ratrig EVA 3 system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A direct-replacement height-adjustable probe mount for BTT eddy on Ratrig EVA 3 system
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 304
- Makes
- 1
- Views
- 1,336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
--------------------2025.01.17 Update----------------------------
I want to apologize to @MDFPereira for my criticizing his attribution to the BTT repo. To my defense and clarification from @MDFPereira, it seems the mounts on the repo are for non-Volcano style hotends but aren't mentioned in the repo description/filename.
If you use the non-volcano style hotend, and don't need the adjustability, you can still use the mount from repo.
---------------------------------------------------------------------
A simple mount for mounting BTT eddy on the Ratrig EVA 3 ecosystem, with adjustable heights.
The mount has come up because of the misleading EVA mounts in the official repo. These mounts lift the probe too high, guaranteeing a failure in calibration.
Directly replaces the existing probe mount and reuses the original mounting holes.
To mount the probe, you only need:
- 2x M3x8 Cap Head Screw(From existing mounts)
- 2x M3x25 Cap Head Screw(From the BTT eddy accessory)
- 2x M3N Nut(You may find some from the leftover of the printer assembly, or prepare your own)
The included photos show the assembled looks, which you can use as a reference.
Before tightening the BTT eddy to the mounts, MAKE SURE that the probe is 2~3mm higher than the nozzle. (Thanks @EODesigns from Ratrig community discord, for saving my misery on installing on my own printer)
I am currently testing it on the EVA 3 with a Phaetus Rapido 2 hotend. Although I made the probe mount compatible with the LJ8 probe mount, I do not guarantee compatibility with other hotends. USE CAUTIONS.
To make life easier, the XY offsets are measured below; you can use them as a starting point to do the probe XY offsets.
