LSI 9206-16e Reference
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A non precision reference model I threw together so I could build a fan shroud.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Be warned, this model is extremely Ehh, Good Enough™.
The detail is minimal, measurements were taken with a $22 digital caliper, and I rounded all of the dimensions to the nearest 1/4mm, so a laser scan or micrometer precise model this is not.
I rounded everything to avoid having to chase tenths back and fourth, which worked, but instead I had to deal with tolerance stacking which was equally annoying and time consuming. So overall it was dumb. Don't do this.
I made this model to facilitate designing a fan shroud for the card and I figured +/- 0.10-0.15mm is plenty close for that purpose, especially in the context of FDM. At a minimum critical dimensions like positioning are as accurate as possible… within a resolution of 0.25mm of course.
(STL included only for the 3D preview, use the STEP or F3D for actual modeling)