Replacement Hood Clip for Viessmann Vitodens 300
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
to replace the plastic clip holding the hood on the upper edge of the gas boiler
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 32
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement clip I made for our gas boiler. There are two of these clips holding the upper edge of the metal hood of the boiler. One was missing as long as I remember and as we had some noise coming from the hood of the boiler, I thought fitting the second clip could help by reducing the vibration of the hood.
Although the clip is a good fit, it did not help with the noise. But at least there are now two clips as it is supposed to be. ;-)
Print with the side where the clip is open facing down (like in the screenshot), no suports required.
Printed here in PETG, white. Photo showing the original clip and the printed “copy” side-by-side.