Wrapping Paper / Tall Items Bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My wrapping paper is in the same closet as my 3D printer and kept falling over. I designed this to solve the problem.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This uses a a little more than a kg of filament, but the weight keeps it from falling over.
It can be printed without supports. The lower portion prints right side up and the upper portion prints upside down. The holes on the upper portion are designed as overlapping bridges so should not require supports when printed upside down.
Assembly is four M4 threaded inserts into the lower portion and four M4 x 10mm cap head screws to attach the upper.
Requires print volume of 212mm x 200mm x 225mm.
Print in photos were printed on a Creality K1C with Inland Matte PLA.