GlowBit 8x8 LED Matrix Cellular Diffuser
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.25 – €1.53 net (excluding VAT)
For file: diffuser1-Body_0.2mm_PLA_MK3S_1h36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.39 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A clip-on diffuser for the GlowBit™ Matrix - 8x8 LED. Also separates cells for better looking graphics square graphics.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 124
- Makes
- 0
- Views
- 523
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I printed at 0.2mm. The bottom when printed, which becomes the top, is done with two layers at 45 degrees. I used generic white PLA, but anything that is slightly transparent should do.
More of my builds at makies.au