1 / 5
OPXL Enclosure Exhaust Fan Shroud Screw Adapter — image 1
1 / 5

OPXL Enclosure Exhaust Fan Shroud Screw Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If you have shaky hands that fumble screws, these adapters make it easier to replace an XL exhaust fan filter.

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
71
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I have my OPXL5H (with Prusa enclosure) on a desk inside a closet space. Moving that behemoth to replace exhaust filters is quite an effort. It is complicated by the need to remove the 4, tiny torx screws that hold the shroud over the exhaust fan assembly. With these adapters I can pivot the XL, on the desk, to one side or the other and reach around to easily remove and replace the filter without the need to fumble with tiny screws and a torx driver.

I printed the adapters with Polymaker PETG on an OPXL5H with .6 nozzle and .32 speed layers (input shaper). I used 2 perimeters and 20% gyroid infill. No supports are required, although you may need to clean out the screw hole with a 4mm bit. print with the 

In addition to the adapters you'll need 4 each 4x30 pan head bolts and 4 self locking nuts. The self locking nuts aren't required, but I think they help to keep the screw tight in the adapter. YMMV.

Tags