Hummingbird & Fuchsia clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 8 inch wall clock with ruby-throated hummingbirds and fucsias.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You can use the components from here:
https://us.store.bambulab.com/products/clock-components-kit-011
The back mounts with M2.5 x 6mm long screws (same as my pen models)
https://www.mcmaster.com/92010A016/
This is made with layers so it can be printed with a single-color printer. Use 0.8mm layer heights once you've printed the clock face. 8 colors in total in 9 sections.
White, yellow, gray, white, red, green, pink, purple, black.
To print with a single color printer, insert pauses at each color change layer (Cura > Post Processing >Modify G-code > Pause at layer)
To print with a Bambu and a 4 color AMS, Load up White, Yellow, Gray, Red into slots 1-4.
Tell it to print Green, pink, purple, & black with slots 1-4 as well.
Start the print, then immediately remove the red material. This will cause the printer to stop when it reaches that color and wait for you to load material.
When you load Red, pull out white, yellow, and gray. Place the Green and Pink into slots 1 & 2 (slot 3 will be empty.
The machine will pause again when it's ready for purple. Remove the Red from slot 4. Insert Purple into slot 3 and Black into slot 4.
See also: https://www.printables.com/model/1404565-hummingbird-clock-4
https://www.printables.com/model/1406226-sunflower-clock