Frame walls for Core Frame System 250mm, Flat Frame Grind Block Repurposed. Flat 58mm setup.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combining Core Frame System and Flat Frame grindblock. Rigit, yet small and easy print, no supports.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 21
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Flat frame grind block has two mounting holes. Utilizing those, theese walls can be printed in smaller parts. In addition of a 250mm aluminium core + hardware, you only need two Flat frame grindblocks and four 8mm axle bolts.
Flat 58mm setup. (Bigger inner wheels might touch frame bolt).
3mf file precut to fit Prusa Mini+ (18x18cm print bed) 0.6mm nozzle. One bed / wall.
You will need to trim the wheel holes with 10mm drill bit to get a firm fit for the hardware. (Or just use a sharp knife to open them a bit, if you dont care for a perfect fit.)
More about Core frame system: https://5050frames.com/core-system. (I have no affiliation).