JST Panel Socket Cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.14 net (excluding VAT)
For file: Oslona na JST_0.2mm_PLA_MK3S_9m_2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
JST Panel Socket Cover
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Wanting to place a dummy load inside the enclosure, I encountered a problem with routing the temperature measurement socket to the front panel. I decided to keep the original JST connector of the temperature sensor, and install a JST socket with a printed cover on the panel. The JST socket cover can also be used in other front panel projects. I used an M2x3 insert, but an M2.5x3.5 should also fit.