NFC Enclosure For MiSTer (DE-10 Nano)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for a PN532 NFC module to launch cores/games
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 570
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an enclosure that houses a PN532 NFC reader PCB with a type C USB connector (https://www.amazon.com/Teyleten-Robot-Wireless-Module-Attenna/dp/B0DKTK9VS9). This device can be connected to the DE-10 Nano/MiSTer to launch cores/games using NFC tag stickers embedded in GameBoy cartridge shells or by using NFC cards with the included insert.
Two 4.6W x 5.7H M3 brass inserts and 6mm tapered head machine screws are needed to secure the top and bottom pieces together. The NFC reader is held in place by four 6mm M2 self-tapping screws. An extra screw can also be used to secure the card insert into place so that it doesn't pop out accidentally.
The top part of the enclosure and card insert can be printed together at the same time if your machine is dialed in and has good dimensional accuracy.