HDD Drive Disk Sander Disk - for Seagate BarraCuda 1TB
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a disk sander I made from an old, broken HDD Drive.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 27
- Makes
- 0
- Views
- 572
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a disk sander I made from an old Seagate BarraCuda 1TB HDD Drive.
Just remove everything from the HDD until there's only the motor and the original mirror-looking disk with the data on it left. then unscrew the disc and mount this printed part in its place. you can then stick some sandpaper onto it with some thin double-sided tape.
I'm driving the motor using a 4s Lipo as a power source (around 16V), a Brushless RC Plane ESC with 12A and a servo tester to regulate the speed.
works well for smaller things like sharpening knife blades or tiny wooden pieces but it doesn't have lots of power so don't expect it to be sanding down your table or anything.
Feel free to add a ''Make'' If you decide to print this and push the like button if it works well for you!