1 / 2
RAM Conduit arm 25mm Ball
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
25mm Ball ends to make any length RAM mount arms from 20mm conduit and m6 threaded rod
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Print two.
Add an m6 nut to each.
Cut a piece of 20mm conduit to length - I used PVC. Steel may work for increased strength.
Insert prints into ends of conduit.
Screw a suitable length of m6 threaded rod through and tighten.
I found a couple of coats of “chlorinated rubber” paint on the ball made these as “grippy” as the commercial rubber-coated mounts.