EZViz Indoor Pan & Tilt Camera Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for EZViz Indoor Pan & Tilt Cameras.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 491
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Upload of my model created in April 2024. It was printed on a Prusa Mk3S+.
If you have your EZViz pan & tilt camera on a high shelf, you'll find that most of its movement area will just show you the ceiling. This model lets you keep the EZViz camera on the high shelf but allows you to have it upside down, giving you a more useful visible area. You’ll need the original ceiling mount and three 15mm screws.
CameraHolder is the original that I printed.
CameraHolderThin_v2 is a thinner version.
CameraHolderThin_v4 uses hexagonal cut outs on the back. Please note that I made use of this SCAD library: https://www.printables.com/model/698467-hex-grid-scad-updated-to-allow-frame-wall-width-in/files.
The photos are of CameraHolder and CameraHolderThin_V4. I’ve tried this with a couple of different models. They all fit, it’s just some have more clearance than others.