Bambu Lab Purge Bucket for X1 Carbon, P1P and P1S series [REMIX]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a bucket that suits the small space available around my P1S but big enough and that I can remove easily
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Design
I started from the model Bambu Lab X1 Carbon P1P Poop Chute Purge Bucket made by MK HANNON that I adapted to my need
This model fully address the need of having a bucket to recover the poops (purge residues), an efficient size not to big or too small and that can be easily removed or placed thanks to 2 magnets that will fix it to the back plate of your printer

Magnet sizes are 12mm diameter and 2mm thickness. But using .f3d or .step file you can modify the design and adapt it to your magnets
More it has a slot to allow usage of external spool without removing it

This model is compatible with X1 Carbon, P1S and P1P series with or without AMS
Printing
I printed it in Prusament PETG Anthracite Grey, color which is not so far from Bambu Lab one. I used 0.20mm layer height to keep a nice look but it can be printed with higher value.
It can be printed on a MK4 or MK4S that has enough height printing capability. I attached as well .gcode file for MK4
Magnets are simply glues on the bucket using CA glue. One can use double side adhesive as well
On top of .stl and .3mf files, I uploaded Fusion 360 .f3d and.step files so you can modify the design and adapt it to your needs.
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes.
Enjoy
If you like this model, take a look also at my other designs in Printables.