Castle Tower (Multicolor/Multimaterial)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
Yesterday I designed this cute little tower in Tinkercad.
It's designed to be printed in 4 colors (grass, door, brick/stone, and the top color, which I chose to be purple). I included an extra STL file if you don't have a multicolor printer, which is ok!
The print time took about 10 hours on my Original Prusa i3 MK3S MMU2S.
Print instructions
If you're using a single-color multimaterial unit like the MMU2S or Palette, feel free to add extra purging to the lighter colors. The color doesn't need to be changed a whole lot! Just make sure the green or purple doesn't get tainted with gray and you'll be all set!
Now that "No sparse layers" is a feature in PrusaSlicer, I HIGHLY recommend using that to save a lot of time and plastic, since most of the wipe tower would normally be hollow since there are only a few color changes. This is a perfect model to test the setting with!