1 / 3
Halfords Toolbox Replacement Latch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Replacement latch for a Halfords toolbox
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement toolbox latch for a Halfords toolbox. The latch arm is from Biglikerobot, but a copy here also; the latch catch is designed to snap on and will likely not survive being removed without breaking one of the printed arms. The latch arm is attached with an M3 screw. I used two screws per latch on either side. It was printed with TPU for AMS, and I used a drillbit to ensure the endholes were the correct size after printing.