Flite Test swappable power pod fire wall with reinforced walls
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stronger alternative to the standard FT fire wall with a stronger design and works with the power pack B and C
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a reinforced version of the standard FT fire wall with plastic walls that go back and increase the strength of the power pod. You can drill out a hole to fit a barbecue skewer to hold the power pod to the fuselage and this prevents the skewer from ripping through the power pod if you crash.
Print Settings: 0.2 mm layer hight is good and print it with 4 wall loops to get a solid part. Print the part in the orientation seen in the slicer picture above for the strongest walls possible. You will need supports if you print it this way
Please leave a comment if you want me to change or modify any thing about this design.