1 / 5
Axial SCX6 battery trays
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact battery trays to suit Axial SCX6
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 0
- Views
- 533
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Here I have a pair of compact battery trays that I made for my SCX6 so I could remove all of the unnecessary factory plastics.
- The left side tray allows you to run a smaller/ lighter main battery pack. They're designed to suit my 4500mah packs. One of the mounting holes requires you to drill a hole in the chassis, however this is optional. The other 3 bolts should be sufficient. The battery is held in place with 2x Velcro straps up to 18mm wide.
- The right side tray allows you to run a smaller battery pack for externally powered steering servo's. The battery is held in place with 1x Velcro strap up to 20mm wide. The tray also includes a provision to hold the shift servo wire in place.
Note: The mounting holes can be printed without supports, but will require cleanup with a drill bit or hobby knife.