Prusa MK3.5 Raspberry Pi Zero 2W Case + Clamps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi Zero 2W case for Prusa MK3.5, mounted with two no-screw clamps.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 1
- Views
- 292
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
PrusaLink did not really work for me, it is too slow, too unreliable, too buggy. So back to Octoprint, on a Rasperry Pi Zero 2W. I wanted to mount the Pi Zero as simple as possible, preferably without screws.
The case itself is simple, two shells that are held together by an small inserted lock bar. No screws are needed for mounting the case on an MK3.5, you just snap the two clamps on the printer frame. The Pi Zero connectors are pointing backwards, so the power cable and the serial cable are not interfering with the (moving) bed and print head cables, which makes guiding the cables a breeze.
Note that the case is in a perfect position to support a camera (see pictures).
Regarding the cable from Pi Zero 2W to Prusa: you need male micro USB on one end and male USB-C on the other end. My solution was to get a cheap adapter that goes from female USB-A to male USB-C, so I could use an old USB-A to micro USB cable.