IKEA Aurdal Leg for Side Panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The bottom support leg for an IKEA Aurdal wardrobe system's side panel.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 41
- Makes
- 0
- Views
- 408
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
Support leg for the side panels of an IKEA Aurdal wardrobe system (which is sold with the panel as per https://www.ikea.com/us/en/p/aurdal-side-panel-with-leg-white-50460928).
Designed to be mostly identical to the original with a slightly thickened extension that has the stabilizing hole to add some rigidity since the original is metal. Doesn't provide much stability to the wardrobe system horizontally but provides all the needed vertical support.
At the bottom is a cutout for a random nut and bolt that I had lying around to use for height adjustment using something that can handle the weight more easily. My nut and bolt was about 12.5mm, so these cutouts are 12.75mm to add some clearance. F3D file included so that you can update the sketch to match whatever you have on hand.
I strongly suggest printing this on its side so that the forces go down full layers, and using PETG to minimize creep.
Print settings
Infill: 50%
Infill type: Cubic
Material: PETG
Supports: Organic, Build Plate Only
Print orientation: on the side, with the support arm in contact with the bed.
Number of bottom layers, perimeters, etc: 5