Case for the Seeed Studio XIAO Expansion Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the Seeed Studio XIAO Expansion Board with access to SD card, user button, USB-C and display
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 159
- Makes
- 1
- Views
- 782
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Housing for the Seeed Studio XIAO Expansion Board
I’m trying to create a datalogger with integrated zigbee switch by using a esp32-c6 chip.
During research, I found the seeed xiao esp32-c6 module which allows zigbee communication.
It also fits nicely onto an expansion board with many nice features for a datalogger:
- Micro-SD card slot
- RTC for time keeping
- Connection for sensors (two DHT22 in my case)
- A button to switch modes
- USB-C powered or battery powered with integrated charger
- Small display for status information
This nice parts needs a cover, which is presented here. The SD card, the user button, the USB-C port and the display are accessible to the user. The reset button is by intention not reachable.
There is also a breakout to fit cables. If not needed, you can easily close it in the slicer.
Parts required
- Seeed Studio XIAO Expansion Board
- seeed xiao esp32-c6
- 4x Threaded Inserts M3 x 5.7 mm, e.g. this
- 4x M3x16
Print instructions
Print both parts laying flat on the big flat surface.
I print them in simple PLA.
Assembly instructions
Use your soldering iron to insert the threaded inserts.
Remix welcome
Feel free to remix the file. You can start by using the files in onshape.