Trident pico mmu monolith mods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My mods for the trident including a pico mmu mods, fiberstream mod (lancer, bmg, ebb36) and monolith wiring guides
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 113
- Makes
- 0
- Views
- 1,485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Includes:
Cable guide clips for the monolith gantry. Front stepper cable guides use m3x20mm aluminum standoffs (5mm od)
Fumepack mods for biqu turbo (cpap), triple ecas fittings for mmu and space for an extra layer of 3mm foam tape around the rear panel (making room for the monolith gantry). Some parts from https://www.printables.com/model/831149-voron-cpap-with-muffler
Fiberstream mods for lancer long hotend, bmg extruder (8t motor), x endstop, ebb36, mosquito net style titanium hotend support for the lancer and 3-1 filament hub or single ecas fitting.
Z axis mods for countersunk washer/bolts
Pico mmu rear mount, spool holder top mount (spool holders slightly modified from Rigattoni on discord). Extrusions should be the same length as your x beam in case you've upgraded to a lightweight x beam.
Some parts are untested and some might not work with the stock voron parts. Fumepack requires extra cutouts in the back panel compared to stock. Panel clips are annex clips of different sizes. Monolith gantry is an earlier version, use r1 parts/bom instead of taking from the cad file.