Noctua NF-A15 Dust Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dust cover for the fan.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I made this dust cover because the dust build-up in the cpu heatsink is annoying to clean. Also it provides cover for the fan blades. I am not sure if this is going to work so we'll see in a month.
There is two files, the inner part and the outer part. Center both in your slicer and choose for the inner part to have these settings different:
- Top layers: 0
- Bottom layers: 0
- Infill pattern: your choice, I chose grid
- Infill density: again your choice, I chose 50%
At least in Cura if you press the model, there is a feature on the left side called “per model settings” where you can change these settings. Don't know how its called in other slicers.
The cover can be attached with the same hooks you would attach the fan.