1 / 2
Adapter minisforum um790 pro - noctua 120mm fan (e.g. NF-A12x25 5V) — image 1
1 / 2

Adapter minisforum um790 pro - noctua 120mm fan (e.g. NF-A12x25 5V)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter to mount a noctua 120mm fan (e.g. NF-A12x25) to a minisforum um790 pro

Rating
0 / 5
Likes
12
Downloads
93
Makes
0
Views
1,286
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

This is an adapter to mount a noctua 120mm fan (each version should, e.g. for me NF-A12x25 fan) to a minisforum um 790 pro. This allows for super silent operation.

For the assembly first unplug the power supply on your minisforum. Then remove the silicon feets on the um790, loose/unscrew the screws and then there is a slight notch where you can lever the lid. Be careful while opening because the original fan is mounted on to the bottom plate. Unplug the original fan, put the original baseplate aside, you don't need it anymore (you might want to peel off the sticker with your serial number and put it somewhere else on your minisforum).

Then, insert the original screws into the adapter, followed by the silicon anti vibration mounts (noctua NA-AV2). These are pushed from the bottom with the thick end into the inner holes. Gently pull from the other side so it slips into its nut. Then, screw the adapter gently (!) into your minisforum um 790 pro. Finally, assemble your fan to the anti vibration mounts and again gently pull them so the fan slip into its assigned nuts.

 

Print instructions:

  • Print upside down
  • Use support on print surface (necessary for the hole closure)
  • Print with 3 bottom, + 3 top layers
  • print with 3 walls

STL + Fusion file attached so you can adapt on to your needs.

 

Have fun

Tags