1 / 7
Collet Holder ER32, stacking
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with support for the handle elements,
I used a 0.6mm nozzle and 1.2mm walls. One rack takes about 300g and 11hrs
The -3 and -4 size do not stack with each other so it's best to stick with a single size.