1 / 2
Perpetual Calender
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Design calender with interchangeable labels.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 47
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to its timeless look, it will still be up-to-date even in the 4th millennium.
Size: 210 x 210 mm
Print instructions:
base plate:
- PLA, 0,16 mm layer height, 0,4 nozzle
labels:
- PLA, 0,16 mm layer height, 0,4 nozzle
- Note that the labels are printed upside down to get a nice surface.
- Color the characters of the labels on the top and bottom as can be seen from the pictures below.
- Make sure the print bed is very well cleaned, precisely leveled and flow dynamics are well calibrated.
- After printing the characters of the first layer, clear the print bed of any filament residue that may be caused by stringing or dripping. Otherwise you will see dirt particles on the labels.