Bushing Baseplate for Dewalt DCW600B Palm Router
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.14 – €1.40 net (excluding VAT)
For file: Dewalt DCW600B Bushing Plate 3_16ths Project_0.4n_0.25mm_PLA_MK4S_56m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.27 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 55.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Baseplates with integrated bushings for templating or engraving
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 67
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These baseplates replace the stock baseplate and integrate a bushing for use with templates.
I use these for engraving bits which don't have bearings.
It can be hard to see what you are doing with dust extraction so I printed one in Formlabs Creator Super Clear resin and its much easier! FDM works ok, too. Beware the 3/16" offset when printed in FDM has a very narrow bushing wall so go easy.
It is rigid enough at 0.25mm layers and 30% infill.
Fusion project is attached for customizations.