Oilers improved golf ball marker
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.17 – €0.21 net (excluding VAT)
For file: edmonton_oilers-marker stronger_0.4n_0.2mm_PETG,PETG,PETG_XL_13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 12.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The Pin was a very weak spot and would break (feedback from the community). This remodel fixes that issue.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 27
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
The Pin was a very weak spot and would break (feedback from the community). This model fixes that issue. I added pictures of the strength analysis of both current models and the new one. Hopefully this proves to be the right combination. PETG or better. Note I know many want to print as fast as possible but this does NOT work well for small items. Either some down speed or put more on the plate and spread them apart so the filament cools down sufficiently before the next layer.