onshape sans font test/demo (parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These models can be used to test the sans fonts of onshape CAD in different sizes.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
These models can be used to test the sans fonts of onshape CAD in different sizes and you can change the demo text and size as parameters (see below).
Print settings
- 0.4mm nozzle
- layer height: 0.15mm
(4 layers total = 2 layers base, 2 layers text height, can be changed in onshape) - optional color change after second layer
- use arachne perimeter generator for small sizes
Source and parameters
The original files can be accessed and changed at onshape font test/demo.
The model there uses the following variables. If you want to change multiple variables at once position the roll back bar before the text sketch to save some regeneration time.
#LayerHeight#BaseHeightLayers= number of layers for the base plate#TextHeightLayers= number of layers for the text#DemoFontSize= size of the text to be tested#DemoText= demo text to be used*#DemoTextWidth= width if the demo text (used for proper spacing), given as a multiple of#DemoFontSize#InfoTextFontSize= size for the info line at the top#FontNameWidth= with of the font name column (used for proper spacing), given as a multiple of#DemoFontSize#FontSepY= vertical distance between the rows#Border= border around the whole text for the base size#SizeX(measured) = total size in horizontal direction#SizeY(measured) = total size in vertical direction
* Please note that the font Didact Gothic has a bug causing the character 2 to not be extrudable in small sizes, thus the demo text may not contain it.