1 / 3
Regenwormen ( Pikomino ) Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Regenwormen ( Pikomino ) Box with magnets
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 2
- Views
- 200
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a new box for game Regenwormen ( Pikomino )
Original box is not orderly and too big. So this box designed with simplicity in mind. Hope you enjoy it!
Instructions:
3mf files (orcaslicer) also has the color profiles set. So if you have multi material printer you don't have to color yourself.
Extra Materials:
- 8 of 6mm*2mm circular magnets
There is 2 profiles:
- Regular: Regular one hides the magnets inside the print. There is already some pauses in the 3mf files so you can put magnets in. So if you change layer height you would have to change the pauses as well. I would suggest adding a little bit of glue before inserting the magnets. Otherwise there will be a clicking sound whenever open/close the lid.
NOTE: Don't forget to pay attention to magnet orientations - Easy Magnet: There is no pauses but after printing you can glue the magnets inside the box where the spaces are. Since it's not closed you have less chance to put the magnet orientation wrong
After printing use piece of filament as hinge
Happy printing!