1 / 6
[OEGB] NEMA 17 Stepper-Motor-Gearbox 1:3 Print-In-Place — image 1
1 / 6

[OEGB] NEMA 17 Stepper-Motor-Gearbox 1:3 Print-In-Place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Pleanetary gearbox for NEMA 17 format motors, providing 1:3 reduction

Rating
5 / 5
Likes
34
Downloads
230
Makes
1
Views
1,358
Reviews
1

Updated at source:

Model information

License
GNU General Public License v3.0

Planetary gearbox for NEMA 17 stepper motor. 36 teeth on the hollow gear, 12 teeth on planetary and sun gear, resulting 1:3 reduction. Changes and additions may be made later on.

Mount with M3x30 screws

Print information:

The model mostly uses clearances of 0.2mm, your printer should be able to realize those. Friction and play may vary on print. When slicing check whether the slicer merges lines from the planetary gears to the hollow gear.

Only the Nema17_Gearbox_PiP and Nema17_Gearbox_Spacer .stls are for printing. The other parts are supplied to enable modding if necessary, they are already incorporated in the PiP. Due to herringbone gears, this can not be assembled or disassembled after printing.

After printing, the gearbox might be stuck. Screw in M3 screws into 2 of the holes in the front and apply a little torque or wiggle to break the gears loose.

Tags