1 / 3
Pinecil v2 Case no magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pinecil v2 soldering iron + short tip case
- Rating
- 4.667 / 5
- Likes
- 12
- Downloads
- 98
- Makes
- 3
- Views
- 538
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I recommend printing the parts as oriented in the provided STL files. The mount is designed to fit only the short probe tips, like in the original model. Magnet holes have been removed, and small dimples were added instead.
Recommended Print Settings:
- PLA or PETG
- 0.2 mm layer height
- At least 10% infill (any pattern)
Please post your makes! :)