1 / 7
Lego Star Wars 75401 - Ahsoka's Jedi Interceptor (2025) — image 1
1 / 7

Lego Star Wars 75401 - Ahsoka's Jedi Interceptor (2025)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wall mount pieces for Lego Star Wars set 75401 Ahsoka's Jedi Interceptor (2025)

Rating
0 / 5
Likes
18
Downloads
117
Makes
0
Views
966
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial — Share Alike

Wall mount pieces for Lego Star Wars set 75401 Ahsoka's Jedi Interceptor (2025)


2-piece set to mount Lego set to the wall. 
Wall mount is created in a way to show Ashoka's Jedi Interceptor in rotated and tilted down position, mainly as its designed to be mounted to the side of a shelf unit but keep the model pointing outwards and downwards.

2 pieces separated to allow for easier printing, and to allow for designing and printing alternate mount pieces to allow for different angles/positions

  • Print WallMount upright with the open slot to the top.
    (Supports may be required for screw holes depending on printer settings)
    WallMount can also be printed with its back to the heatbed but will require supports that can be removed cleanly.
  • Mount piece can be printed vertically, with the back section on the print bed, with supports enabled for the arms.
     

Secure WallMount part to the wall via suitable fixing. Open slots should face upwards.
Slot Mount piece down into WallMount piece with nubs on arms facing upwards.
Lego Set can be placed down, with the arm nubs slotting cleanly into the openings between the cockpit and wings, on the underside of the model.
Spring missles have to be removed for mounting.

Should print fine in PLA or PETG.

I printed parts in PLA at 0.2mm with a 0.4 nozzle.
4 or 5 perimeters/shells recommended. 

CAD files included to allow for modification of pieces if alternate angle/positions are required.

Tags