Dragon Ball Z - Goku HueForge V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed with HueForge and colour match, thiner and fast to print.
- Rating
- 5 / 5
- Likes
- 81
- Downloads
- 323
- Makes
- 5
- Views
- 1,419
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an improved version of my previous attempt
This design gets the most of HueForge using ColorMatch, which creates a more defined model and colours.
I've added a picture to see both models compared.
The new one is also a thinner model which makes it more subtle and 2x faster to print.
I've included the STL this time just in case you want to play with it.
I hope you enjoy it!
----
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 90.03x160mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Brown
At layer #5 (0.48mm) swap to Jade White
At layer #12 (1.04mm) swap to Red for the rest.
If you resize the model make sure you do NOT scale the Z axis
-----------
Please leave a rating or comment if you like the print!
Want to sell my prints? Commercial License is available here: https://patreon.com/asniaire
You can check out the rest of my designs here: https://www.printables.com/@asniaire
If you'd like to support my work, you can buy me a coffee :)