Dragon Ball Z - Freezer HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Freezer HueForge
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 44
- Makes
- 0
- Views
- 282
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Marine Blue
At layer #12 (1.04mm) swap to Beige
At layer #18 (1.52mm) swap to Jade White for the rest.
If you resize the model make sure you do NOT scale the Z axis
-----------
Please leave a rating or comment if you like the print!
Want to sell my prints? Commercial License is available here: https://patreon.com/asniaire
You can check out the rest of my designs here: https://www.printables.com/@asniaire_1422755
If you'd like to support my work, you can buy me a coffee :)