Timor Perpetual Calendar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printable replica of the iconic Timor perpetual calendar by the famous Italian artist and designer Enzo Mari
- Rating
- 4.667 / 5
- Likes
- 130
- Downloads
- 491
- Makes
- 4
- Views
- 3,614
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
All the parts have been recreated to be easily printable without particular equipments – it just take a pretty long time to print all the parts.
The main body should be printed in its final position and it requires supports – I printed mine with the "buildplate touching only" option checked and it bridged pretty well the other part. I think that cura tree supports could also work great. Any resolution is ok, mine was 0.24mm
The screws should be printed with the round part facing the plate, without supports. A small layer height is most suitable for the screw to work properly.
The cards are designed to be printed with 5 layers 0.16mm tall, with the first two layers in one color and the other tree in another. To do this a simple filament change M600 code or equivalent is ok.
You need a very good bed adhesion, to avoid warping on the parts – even if a little warp on the corner can easily be fixed with a heat gun or an hair dryer.