Stargate Platform for Master Replicas Earth Stargate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A base for the Master Replicas [Earth] Stargate model. The base is based loosely off of off-world gates.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 94
- Makes
- 0
- Views
- 720
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
This is a base for this Stargate model (which I highly recommend; it's quite detailed!): https://www.masterreplicas.com/en-us/products/sg-1-stargate
This is printed in two major sections:
1: The Stargate mount (which is two pieces), which I printed on an XL in black PETG with PLA supports for the thicker piece (the “wings” which stick up above the platform were printed suspended off the platform with a bed of supports, whereas the back wall of that piece was the first layer). https://youtu.be/ujlf2mueZ9A
2: The platform, which I printed on an XL with two colors of PLA (and no supports). https://youtu.be/RLi86o_5nGw
The mount requires adhesive-backed felt and two M4 flat-head screws. Anywhere between 8-12mm in length (M4x8 to M4x12) will work; they're not particularly structural. There is “semi-circle cut reference” print which lets you trace on to the adhesive backing where to cut (it has some margin, so trace it with a fine-tip marker and cut along the marker).
I printed v14, but had some issues (because I missed a couple issues with an extrusion at the top of the stairs, and also missed a chamfer). I believe I've fixed that in v17 but have not print-tested it (and don't plan to).
Also a caveat: my Master Replicas gate is roughy 245mm in diameter. I have no idea how uniform their gates are, so they may vary in size. It should be relatively easy to modify this model if you have a gate of a different size.