1 / 7
Magnetic Stabilizer for Seat Belt | Stabilizzatore magnetico per cintura di sicurezza Land Rover Defender — image 1
1 / 7

Magnetic Stabilizer for Seat Belt | Stabilizzatore magnetico per cintura di sicurezza Land Rover Defender

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnetic Stabilizer for Seat Belt / Stabilizzatore magnetico per cintura di sicurezza

Rating
0 / 5
Likes
0
Downloads
15
Makes
0
Views
206
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Magnetic Stabilizer for Seat Belt | Stabilizzatore magnetico per cintura di sicurezza

For the print, you will need to include a pause in the slicer to insert the magnet.

Steps to Add a Pause in Bambu Studio:

Prepare Your 3D Model:

  • Design the model with a cavity or slot where the magnet will fit. Ensure the dimensions match the magnet size for a snug fit.

Load the Model into Bambu Studio:

  • Open Bambu Studio and import your model as usual.

Set Up the Pause for Magnet Insertion:

  • Identify the layer at which you want to pause the print (this is typically the layer just before the printer starts covering the cavity for the magnet).
  • In Bambu Studio:
    • Go to the "Preview" mode after slicing the model.
    • Scroll through the layers to find the precise point where the pause should occur.
    • Add a Pause Print Command by using the "Insert Pause" option available in the software.

Test the Pause:

  • Verify that the pause happens at the right layer in the slicing preview.
  • During the print, the printer will pause and move the print head away, allowing you to insert the magnet safely.

Resume Printing:

  • After inserting the magnet, resume the print directly from the printer interface.

Tips for Success:

  • Magnet Size: Double-check the size and thickness of the magnet to ensure it fits perfectly without disrupting the layer above.
  • Secure the Magnet: To prevent the magnet from shifting, consider adding a drop of glue if needed, but ensure it won’t affect the print.
  • Test Print: Run a small test print with a similar design to confirm the pause and insertion process before starting the full print.

Let me know if you'd like further assistance or need help designing the model!

Tags