Frame for standing table clock without bottom arch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An excellent way to improve the appearance or save you from a printing defect.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 38
- Makes
- 1
- Views
- 126
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for example, due to a power outage), the foot came off the base a little, or if you ran out of filament and the transition between colors looks ugly, here is the perfect rescue.
Model is supportless. It is very easy to print.
Don't forget to degrease the print bed thoroughly.
The assembly itself takes no more than one minute.
The entire frame is in one piece. If the printer is properly adjusted, it can just snap together and no glue is needed. Otherwise, you can just secure it with glue or double-sided tape.