Weekly Pill Case / Organizer with Personalized Monogram Screw
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.39 – €6.59 net (excluding VAT)
For file: Scaled to 120%; 0.20mm case/lid height, 0.15mm screw layer height / pillcase_case_02mm_and015screw_120pct_pla_mk3s_.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.99 excluding VAT (range midpoint).
- Weight reported by the author
- 69 g
- Print time reported by the author
- 6.28 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Pill organizer / vitamin reminder with a labeled slot for each day of the week.
- Rating
- 4.925 / 5
- Likes
- 425
- Downloads
- 3,311
- Makes
- 68
- Views
- 11,781
- Reviews
- 53
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Pill organizer / vitamin reminder with a labeled slot for each day of the week. To use, loosen the screw 1 turn and twist the lid to the current day. The lid & screw are fully removable to refill the container at the end of the week.
To personalize your case, download the .f3d or .step file for the screw. Each letter is stored in a separate sketch and can be used to update the extrude feature to add your own initials. Just turn on the sketch for the desired initial, then double click on the extrude function and re-select the sketch curves.
Design inspired by the 7-Day Pill/Capsule/Tablet Dispenser by Jambeetle
and the Parametric Pill Boxes by pmoews
Print instructions
Category: Containers Print Settings
Printer Brand: Ultimaker
Printer: Ultimaker 2
Rafts: Doesn't Matter
Supports: No
Resolution: 0.15
Infill: 20
Notes:
Works well with adaptive layer height settings in Cura
Personalizing in CAD
Personalizing the Monogrammed Screw
Download the .f3d or .step file for the screw.
Open the sketches folder and turn on visibility of the sketch for the desired initial.
Double click on the first extrude function in the history tab at the bottom of the screen.
Click X to clear the existing Profile curves, then select the new profile curves for your letter.
Click OK to update the feature.
Repeat for additional letters, then save out the .stl file to print!
Customizing Initial 1
Customizing Initial 2
Customizing Initial 3