NEJE A40640 Protection Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extended laser protection shroud
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 572
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Note: This laser was initially advertised as 15W optical power - I guess they got called out, as it's now advertised as 10W optical power.
I didn't like how open the area beneath the NEJE A40640 was. So I printed an addon. It uses the existing holes and existing window.
Two additional M3 16mm screws are required.
My initial design was flush at the front. However, the diode inside the module is actually as far forward as possible, so I extended the front out 3mm in order to cover more of where the actual laser dot would be.
There is 5.5mm of clearance on the bottom which should still allow for smoke evacuation from the built-in fan. The back area is still free for mounting, and to place a 1-2-3 block underneath for setting the proper focus height.
No supports are required.